Mesa/Boogie Fillmore 25 1×12″ 18/23-watt 2-channel Tube Combo Amp


Categories: ,



From Soft Clip to Saturated

The Mesa/Boogie Fillmore 25 packs the glorious vintage-inspired tone of the Fillmore 50 into a compact 6V6-loaded combo amp. Enjoy everything from legendary cleans to a purring grind, courtesy of a great-sounding 12″ Celestion Custom 90 speaker and two independent, footswitchable channels. Each channel boasts Drive and Hi modes; a 3-band EQ; and Gain, Presence, Reverb, and Master controls. You also get 3-mode channel cloning that supplies even more tonal possibilities. The Fillmore 25’s crown jewel, however, is its super-lush all-tube, long-tank spring reverb. Beyond that, a fully buffered, series tube effects loop makes connecting your pedals and other effects a breeze. Crank up the Fillmore 25, and you’ll experience super-responsive, nuanced tones that run the full gamut between soft clip and saturated.

Welcome to the Fillmore!

The Fillmore 25 was named in tribute to Bill Graham’s legendary bicoastal music venues. Back in the late ’60s and early ’70s, these venues hosted such luminaries as the Grateful Dead, Jimi Hendrix, Miles Davis, Led Zeppelin, Jefferson Airplane, B.B. King, King Crimson, the Allman Brothers Band, Frank Zappa, and many more. The Fillmore 25 captures the same magic dust that placed these venues in the annals of historic concert venues. So plug in and enjoy a responsive, nuanced, organic sound that’s sure to inspire.

Built-in spring reverb for classic electric guitar tones

There’s an incredibly sweet all-tube, long-tank spring reverb in the Mesa/Boogie Fillmore 25, and that’s not even the best part. Each channel has its own reverb level, so you’re not restricted to the same reverb setting for both channels.

Built in the USA to rock hard — and reliably

Mesa/Boogie has been handbuilding some of the most sought-after guitar gear in Petaluma, California, since the late ’60s. Early fans of Mesa/Boogie gear include Carlos Santana and Keith Richards, guitarists whose tones have been chased by countless musicians for years. When you plug into the Fillmore 25, you’re tapping into decades of innovation. The guitarists here appreciate the top-notch sound and construction you get in the Fillmore 25.

Mesa/Boogie Fillmore 25 Combo Features:

  • Packs the glorious vintage-inspired tone of the Fillmore 50 into a compact 6V6-loaded amp
  • Great-sounding 12″ Celestion Custom 90 speaker
  • Dynawatt technology supplies 18 watts (clean) and 23 watts (max)
  • 2 fully independent, footswitchable channels
  • 3-mode channel cloning for even more tonal possibilities
  • Each channel boasts a 3-band EQ and Gain, Presence, Reverb, and Master controls
  • All-tube, long-tank spring reverb can be applied to each channel independently
  • Fully buffered, series tube effects loop for integrating your pedals and processors

Tech Specs

  • Type:Tube
  • Number of Channels:2 channels, 3 style modes
  • Total Power:18W (clean), 23W (max) Class AB
  • Speaker Size:1 x 12″ Celestion Custom 90
  • Preamp Tubes:5 x 12AX7
  • Power Tubes:2 x 6V6
  • Reverb:Tube driven, Spring Reverb
  • EQ:3-band EQ
  • Inputs:1 x 1/4″ (instrument)
  • Outputs:2 x 1/4″ (4 ohms), 1 x 1/4″ (8 ohm internal speaker)
  • Effects Loop:Buffered, Series FX Loop
  • Footswitch I/O:2 x 1/4″ (channel, reverb)
  • Footswitch Included:Yes, 1-button channel footswitch
  • Construction Material:Baltic Birch with Black Bronco Vinyl
  • Power Source:Standard IEC AC cable
  • Height:17.62″
  • Width:18.81″
  • Depth:10.12″
  • Weight:35 lbs.


There are no reviews yet.

Be the first to review “Mesa/Boogie Fillmore 25 1×12″ 18/23-watt 2-channel Tube Combo Amp”

Your email address will not be published. Required fields are marked *